Authentic-style reproduction decals for 1986 Can-Am ASE models (200cc to 500cc); compatible with select vintage off-road motorcycles; brand new, ready to install.

Description

All decals are applied on clear, but laminated for durability. 

Use drop down menu to select the decals you need.

Product #: 

CAN-DE-8600-ASETA – Set of 2 ASE Tank Decals

CAN-DE-8600-ASEFP  – 1 Front number plate (headlight)

CAN-DE-8600-ASESP – Set of 2 Side Panels

CAN-DE-8600-ASE200 –  Set of 2 200

CAN-DE-8600-ASE250 –  Set of 2 250

CAN-DE-8600-ASE350 –  Set of 2 350

CAN-DE-8600-ASE500 –  Set of 2 500

CAN-DE-8600-ASERF – Set of 2 Rear Fender

CAN-DE-8600-ASEFF – Set of 2 Front Fender

Decals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. 

Installation

The most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol will do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.

Plastics

Injection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. 

Explore more from our collection.