Industrial Screw-Type Waste Compactor

Description

The Fairfield service company offers the Screw Compactor manufactured with a through conveying section and screw. The covers are tightly bolted onto the trough and seal the enclosures. During pick load condition the washing process automatically switch to forward direction to handle the large amount of screening with only short interval of reversing, to ensure that the material does not accumulate on the shaft of screw. Discharge piping is provided at the discharge end to dewater the screening.  

The Screw compactor consist of

• • Screw Housing

» Screw housing made of Stainless steel 316 and contains removable cover on top. In counter sunk perforations are provided in dewatering zone to allow the removal of filtrate during compaction. Outlet flange provided for discharge and at bottom of housing contain wedge wire section for drainage.

• • Hollow shaft screw

» Hollow shaft screw is made of alloy steel which provides sufficient strength. It incorporated with perforation which allows water to be injected in washing zone.

• • Thrust bearing

» Thrust bearing is made of stainless steel and flange mounted to the drive with o-ring. It provides support to the screw shaft.

• • Drive assembly

» Drive unit consisting of TEFC electric reversing motor which is coupled with a helical bevel reducer.

• • Drain pan

» Drain pan is connected at bottom of housing and it has given some slope towards to pan so it can provide easy removal. Flushing nozzle is provided for washing.

• • Discharge piping

» Discharge pipe is made of PVC and connected through flange connection at outlet.

• • Discharge chute

» Discharge chute made of Stainless steel 316 L and it connects the compactor and inlet hopper.

• • Control panel

» Control panel is containing solenoid valves and motor terminal strip located inside the junction box. It provides NEMA 4x local junction box and mushroom head EMERGENCY STOP push button.

Explore more from our collection.